| |
| 16Ch Video 4Ch Audio Full Triplex MPEG4 Networking DVR with 3 x USB(Remote System Setup via Client Software, Full Triplex, Hardware MPEG4 Compression, 4 x HDD Bay, USB Mouse Support, Dynamic IP, Static IP, PTZ Control)
|
| |
Features:
| System - Robust Embedded RTOS
Hardware MPEG4 Compression
Simultaneously operate of live, recording, playback, network, and copy
Displays up to 480/400 frames per second
Records up to 120/100 frames per second
Supporting remote multi-client
2 independent watchdog and power failure checkable
Automatic database recovery |
|
| |
|
| Interface - Full function
16 cameras input
4 channels audio recording, two way Internet Audio
Ethernet (10/100Mbps), RS-232
3 USB 2.0 ports for USB mouse, system upgrade, video backup
5 IDE HDDs support (one for removable HDD, option)
VGA, S-video, Spot monitor output
PTZ camera control
Built-in CD-RW backup / optional DVR-RW upgrade |
 |
DVR Setup GUI |
| |
|
| Operation - User-friendly
Motion detection with mouse click and drag for area setup
DVR GUI and client network viewer
Remote controller and USB mouse (not include) support
Digital Zoom 2X / 4X
Support of multi-language
Dynamic IP, DHCP support
Various backup methods: USB stick / extra HDD / DVD / CD |
 |
Internet Remote Viewer GUI |
|
| |
Specifications
| Model Number |
9016MP |
9008MP |
9004MP |
| Video |
Format |
NTSC / EIA or PAL / CCIR |
| Compression |
MPEG4 |
| Input |
16 CH, BNC |
8 CH, BNC |
4 CH, BNC |
| Loop Output |
16 CH, BNC |
8 CH, BNC |
4 CH, BNC |
| Main Output |
1 CH, VGA (Analogue non-interlaced RGB, compatible with TFT LCD supports 50Hz mode in PAL) (option) |
| Spot Output |
1 CH, BNC |
| Audio |
Input |
4CH, RCA |
| Output |
1 CH, RCA |
| Display |
Resolution |
720x480 (NTSC), 720x576 (PAL) |
| Frame Rate |
Max. 480 / 400 IPS
(NTSC / PAL) |
Max. 240 / 200 IPS
(NTSC / PAL) |
Max. 120 / 00 IPS
(NTSC / PAL) |
| Division |
Single, Sequence, Multiple (4,9,16), Digital Zoom x2, x4, Freeze |
| Recording |
Resolution |
360x240, 720x240, 720x480 (NTSC), 360x288, 720x288, 720x576 (PAL) |
| Frame Rate |
120, 60, 30 IPS (NTSC), 100, 50, 25 IPS (PAL) |
| Quality |
Superfine / Fine / Low |
| Mode |
Manual / Schedule / Event (Motion detection / Video loss / Sensor) |
| Water Mark |
Support |
| HDD |
Basic Storage |
1 Removable HDD + 4 x 3.5" IDE HDD (Max. 500GB) |
| Requirement |
5400 ~ 7200RPM, 45MHz DMA, EIDE compatible, Faster than 9.0ms avg. |
| Alarm |
Input |
16 (NO / NC programmable) |
8 (NO / NC programmable) |
4 (NO / NC programmable) |
| Output |
4 Relays, 25 Pin D-SUB |
| Triggered Mode |
Motion Detection, Video Loss, Sensor Input, Power Failure, HDD Error |
| Action |
Recording, Relay Output, Sound Alert |
| Network |
10/100 Base Ethernet, TCP/IP, DHCP, DNS |
| Backup Device |
USB Stick (2.0) / CD-RW / External HDD (option) |
| PTZ Camera |
Support (Up to 16 models) |
| Multi-Language |
English, Spanish, Chinese, Japanese, Korean, Polish, Russian |
| Search Method |
By Date, Time, Event, Block, File, Bookmark, Log File |
| Serial Connectors |
USB 2.0 x3, RS-232C, RS-422 / RS-485 |
| Power Supply |
AC100!240V 50/60 Hz |
| Weight |
Approx. 4 Kg (without HDD) |
| Dimensions (WxHxD) |
430 x 90 x 425 mm (17 x 3.5 x 17) Inches |
| Operating Environment |
30~80% RH, 5�C ~ 45�C (41�F ~ 113�F) |
|
| |
|
|
1 |
Optional Drive |
Optional CD-RW / DVDRW Drive |
2 |
USB port |
USB 2.0 port to use a USB memory stick, Mouse or USB external devices |
3 |
SPOT / ESC |
Button to control spot monitor/ return to the previous menu |
4 |
FUNCTION |
Using this button when you select �USER� in Relay 4 |
5 |
AUTO / F / ( - ) |
Button to begin the auto sequence mode/ decrease the value/ focus in PTZ mode |
6 |
FREEZE / F / ( + ) |
Button freeze image/ increase the value/ focus in PTZ mode |
| 7 |
PTZ |
Button to control PTZ camera |
| 8 |
COPY(AF) |
Button to display the copy menu/ automatically focus in PTZ mode |
| 9 |
SEARCH(PRESET) |
Button to display the search menu/ preset in PTZ mode |
| 10 |
LV / PB |
Button to convert the screen into real view mode or into playback mode |
| 11 |
SLOW |
Button to slow down the playback speed |
| 12 |
FAST |
Button to speed up the playback speed |
| 13 |
DIRECTION |
Button to change the direction of playback |
| 14 |
PB / PAUSE |
Button to start the playback. If press again, a still picture is displayed during playback |
| 15 |
REC |
Button to begin and stop recording |
| 16 |
JOG SHUTTLE |
To make easy search in playback and menu setup/ control the playback speed/ control the zoom of PTZ camera |
| 17 |
LED Display |
Display of the status of power(STANDBY), HDD(HDD) and network(RX / TX) |
| 18 |
CHANNEL SELECT |
Buttons to select the camera or input the password |
| 19 |
MULTI |
Multi-channel select button |
| 20 |
ALARM RESET |
Button to release the event signal/ move the left direction/ PAN left in PTZ mode |
| 21 |
PIP |
Button to control PIP function/ move to the lower direction/ TILT down in PTZ mode |
| 22 |
STATUS/ ( HOME ) |
Button to enter the next step/ display the status/ return to home position in PTZ mode |
| 23 |
D-ZOOM |
Button to control the digital zoom/ move to the right direction/ PAN right in PTZ mode |
24 |
MENU |
Button to display the setup menu/ move to the upper direction/ TILT up in PTZ mode |
|
| |
|
1 |
CAMERA IN |
BNC input ports for cameras |
2 |
CAMERA OUT |
BNC output(looping) ports for cameras |
3 |
SPOT OUT |
BNC output port for spot monitor |
4 |
VIDEO OUT |
BNC output port for the main monitor(Same as the RCA video output of the front panel) |
5 |
AUDIO IN |
RCA input ports for an audio signal(4CH Line input) |
6 |
S-VIDEO OUT |
Output port for the S-video output |
| 7 |
AUDIO OUT |
RCA output port for an audio signal |
| 8 |
VGA OUT |
Output port for the VGA monitor. This DVR is compatible with TFT LCD monitor in PAL mode. |
| 9 |
SERIAL |
Connector for debugging. This DVR can be controlled by the other device through this connector(RS-232C). |
| 10 |
USB1 / USB2 |
USB 2.0 ports to use USB memory stick, Mouse or the external devices |
| 11 |
TERM ON / OFF |
Switch to use the terminal block connectors of RS-422 or RS-485 |
| 12 |
RS-422 / 485/T-ADJ/RELAY OUT |
Terminal blocks of RS-422 or RS-485; Input and output terminal blocks for time synchronization among DVRs; 4 relay output terminal blocks |
| 13 |
422 / 485 |
Switch to convert into RS-422 or RS-485 |
| 14 |
ALARM IN |
Input terminal blocks for alarm signals |
| 15 |
POWER IN |
Socket for a 230/115VAC power cord |
| 16 |
AUTOMATIC SWITCH |
Automatic switch to select between 240V and 110V |
| 17 |
POWER |
Switch to turn the power on / off |
|
| |
| 16Ch Video 4 Audio Full Triplex MPEG4 Networking DVR with USB |
|
|
|
